HAVE A LOOK AT THE HIGHLIGHTS
So far, geometries such as the bore holes of e.g. injection valves in the automotive industry could hardly be measured optically. Lateral probing of components with vertical surfaces was limited to tactile measuring systems, CT solutions or complex special solutions. This changes with a new function of the optical coordinate measuring system µCMM, which we presented at this year's Control show in Germany, Stuttgart. Vertical surfaces of more than 90° can now also be measured optically.
Automatic Wear Measurement on Cutting Tools
The newly developed Module provides visualization and quantitative analysis of tool wear based on high resolution 3D measurement data. The software is an enhancement of the Alicona product range for automatic cutting edge measurement.
Automated Placing and Measurement of Components
Alicona Pick & Place is an automation solution that makes it possible to set up a complete automation process within ten minutes. Therefore an optical measurement system is extended with a robot arm to automatically pick, place, measure and sort components. Pick & Place can also be used in smaller production environments and pays for itself within ten months.
Bruker Alicona @CONTROL 2019
Highly accurate optical 3D measurement systems
Cobots combine a collaborative 6-axis robot and a robust optical 3D measurement sensor to deliver traceable and repeatable high-resolution measurements, even in production. They require no prior knowledge of metrology and make handling, programming, and executing measurement series easy. This is made possible by intuitive hand-guided controls for the teach-in of measurement series, automatic measurement evaluation, and a no-enclosures safety concept.
With the Bruker Alicona G5 users benefit from a micro-coordinate 3D measuring machine and a surface roughness measuring device, combined in a single system. The principle of Focus-Variation allows the measurement of shape and roughness on small, large and heavy components. With an automation interface, InfiniteFocus can also be used for fully automatic measurement in production.
InfiniteFocusSL is a cost efficient optical 3D measurement system for easy, fast and traceable measurement of form and finish on micro structured surfaces. Users measure both form and roughness of components with only one system. Measurements are achieved in seconds and features, such as a coaxial laser for quick and easy focusing, further increase usability. With an automation interface, InfiniteFocusSL is also applied for fully automatic measurement in production.
It is a fully automated cutting edge measurement system for quality assurance of drills, millers and other round tools to be applied in production. Specifically, the EdgeMasterX enables 3D measurement of multiple cutting edges. When utilized in combination with a motorized rotation unit, users benefit from the measurement of multiple tool edges, even chamfered edges, in one single measurement run.
Are your cutting tools competitive?
The following white-paper shows how optical 3D measurement technology can help to identify ideal tool and machining parameters and thus meet customer requirements.
In this webinar you will learn how dimension, position, shape and roughness of complex geometries can be measured with only one sensor. Furthermore, you will receive information on the latest development of the core technology focus variation - 3D hole measurement.
Gear shaft inspection with the 3D coordinate measuring machine
This report shows measurement results measured with the µCMM - the world's first optical-only 3D CMM. The measuring object is a faulty gear shaft, measured with the µCMM and a rotation unit (Real3D).